The use of FIB technique for metallographic preparation and microstructural charcterisation of rapidly solidified alloys /

door Anžel, Ivan., Kneissl, Albert C.

Microstructure evolution during internal oxidation of copper-rare earth alloys = Gefügeentwicklung während der inneren Oxidation von Kupfer-Seltenerd-Legierungen /

door Anžel, Ivan., Kneissl, Albert C.

The microstructure of dispersion strengthened copper produced by internal oxidation of rapidly solidified Cu-Al-Zr alloys /

door Anžel, Ivan., Kneissl, Albert C.

Gefügeentwicklung während innerer Oxidation von Kupfer-Seltenerd-Legierungen = Microstructure evolution during internal oxidation of copper-rare earth alloys /

door Anžel, Ivan., Kneissl, Albert C.

Formation of disperoids during internal oxidation of rapidly solidified Cu-Al-Zr alloys /

door Anžel, Ivan., Kneissl, Albert C.

Microstructure evolution during internal oxidation of copper-rare earth alloys /

door Anžel, Ivan., Kneissl, Albert C.

Internal oxidation of metastable metallic materials /

door Anžel, Ivan., Kneissl, Albert C.

Microstructural investigation of melt-spun NiTi based ribbons = Untersuchung der Mikrostruktur schmelzgesponnener Bänder auf NiTi-Basis /

door Mehrabi, Kambiz., Brunčko, Mihael., Kneissl, Albert C.

Investigation of bending trainings, transformation temperatures, and stability of two-way shape memory effect in NiTi-based ribbons /

door Mehrabi, Kambiz., Brunčko, Mihael., Kneissl, Albert C.

Thermal stability and recrystallization of cold deformed Au-0,5La alloy /

door Kušić, Bojana., Rudolf, Rebeka., Kneissl, Albert C.

The influence of alloying elements on the microstructure and properties of NiTi shape memory ribbons /

door Mehrabi, Kambiz., Brunčko, Mihael., Kneissl, Albert C.

Microstructural changes during vacuum carburizing of steels /

door Brunčko, Mihael., Kneissl, Albert C., Anžel, Ivan.

Fundamentals and experimental results of shape memory alloys : invited lecture, presented at the Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 - August 5, 20...

door Kneissl, Albert C., Mehrabi, Kambiz., Brunčko, Mihael.
Gepubliceerd in 2010

Tracing the growth rate changes during vertical directional solidification by electrical resistance measurements /

door Brunčko, Mihael., Kneissl, Albert C., Anžel, Ivan.

Influence of tensile training conditions on shape-memory properties of NiTi-based ribbons /

door Meharabi, K., Kneissl, Albert C., Brunčko, Mihael.

Microstructural changes during vacuum carburizing of steels = Mikrostrukturelle Veränderungen während der Vakuumaufkohlung von Stählen /

door Brunčko, Mihael., Anžel, Ivan., Kneissl, Albert C.

Microstructural investigation of melt-spun NiTi-based ribbons /

door Mehrabi, Kambiz., Brunčko, Mihael., Kneissl, Albert C.

Microstructure, mechanical and functional properties of NiTi-based shape memory ribbons /

door Mehrabi, Kambiz., Brunčko, Mihael., Kneissl, Albert C.

Functional properties of CuAlNi shape memory alloys produced by melt-spinning : oral and poster presentation at the European conference Junior Euromat 2004, September 6-9, 2004, La...

door Unterweger, E., Lojen, Gorazd., Kneissl, Albert C.
Gepubliceerd in 2004

Development of measurement technique for optimization of vacuum carburizing process : paper presented at the European Congress on Advanced Materials and Processes, EUROMAT 2007, 10...

door Brunčko, Mihael., Kneissl, Albert C., Anžel, Ivan.
Gepubliceerd in 2007