A multiscale approach to deformation and fracture of heat-resistant steel under static and cyclic loading /

od Maruščak, P. O., Baran, Denys., Gliha, Vladimir.

Behaviour of short cracks emanating from tiny drilled holes = Vedenje kratkih razpok, ki nastanejo iz majhnih izvrtin /

od Gliha, Vladimir., Maruščak, P. O., Vuherer, Tomaž.

Udarna v'jazkístʹ bimetalevih zrazkív /

od Maruščak, P. O., Biščak, R.T., Vuherer, Tomaž.

Laws governing the dynamic fracture of two-layer bimetallic composites /

od Maruščak, P. O., Biščak, R.T., Vuherer, Tomaž.

Behaviour of coarse grain heat affected zone (HAZ) during cycle loading /

od Vuherer, Tomaž., Maruščak, P. O., Samardžić, Ivan.

Behaviour of small cracks emanating from tiny drilled holes /

od Vuherer, Tomaž., Maruščak, P. O., Gliha, Vladimir.

Vpliv temperaturi na udarnu v'jazkist' ta dinamìčnu trìšćinostìîkist' stalì 25X1M1F /

od Maruščak, P. O., Biščak, R.T., Gliha, Vladimir., Sorochak, Andriy.

Influence of temperature on the impact toughness and dynamic crack resistance of 25Kh1M1F steel /

od Maruščak, P. O., Biščak, R.T., Gliha, Vladimir., Sorochak, Andriy.

Fatigue strength of welds with various defects made by Vickers pyramide = Vtomna mìcnistʹ yʼjednanʹ za najavnostiì defektìv stvorenih piramidoju Vikersa /

od Gliha, Vladimir., Maruščak, P. O., Jasnìî, O., Vuherer, Tomaž.

Ocenka cikličeskoj pročnosti stali 25X1M1F /

od Maruščak, P. O., Biščak, R.T., Gliha, Vladimir., Vuherer, Tomaž.

Diagnostika sostojanija poverhnosti metallurgičeskogo oborudovanija /

od Maruščak, P. O., Biščak, R.T., Gliha, Vladimir., Vuherer, Tomaž.

Impact strength of main gas pipeline steel after prolonged operation /

od Maruščak, P. O., Danyliuk, Irina M., Vuherer, Tomaž., Biščak, R.T.

Low temperature impact toughness of the main gas pipeline steel after long-term degradation /

od Maruščak, P. O., Danyliuk, Irina M., Biščak, R.T., Vuherer, Tomaž.

Evaluation of dynamic fracture toughness parameters of locomotive axle steel by instrumented Charpy impact test /

od Sorochak, Andriy., Maruščak, P. O., Jasnìî, O., Vuherer, Tomaž., Panin, Sergey.

Physical regularities in the cracking of nanocoatings and a method for an automated determination of the crack-network parameters = Fizikalne zakonitosti pokanja nanoprevlek in met...

od Maruščak, P. O., Gliha, Vladimir., Konovalenko, Igor., Vuherer, Tomaž., Panin, Sergey.

Automated diagnostics of damage to an aluminum alloy under the conditions of high-cycle fatigue = Avtomatizirana diagnostika poškodbe aluminijeve zlitine pri visoko-cikličnem utruj...

od Maruščak, P. O., Konovalenko, Igor., Karuskevich, Mykhailo., Gliha, Vladimir., Vuherer, Tomaž.

Impact toughness of specimens cut out from the rollers of machines for continuous casting of blanks with fused layers /

od Maruščak, P. O., Biščak, R.T., Vuherer, Tomaž., Glad'o, V. B.

Automated diagnostics of damage of aluminum alloy under conditions of high-cycle fatigue /

od Maruščak, P. O., Konovalenko, Igor., Karuskevich, M., Gliha, Vladimir., Vuherer, Tomaž.

Parameters affecting the fatigue strength of welds /

od Gliha, Vladimir., Vuherer, Tomaž., Maruščak, P. O., Jasnij, P. V., Biščak, R.T.

Zamorna čvrstoća zavara s obzirom na zaostala naprezanja = Fatigue strength of welds in the view of residual stresses /

od Gliha, Vladimir., Maruščak, P. O., Jasnìî, O., Biščak, R.T., Samardžić, Ivan., Vuherer, Tomaž.