Slika na naslovnici

QR koda

Razvoj mikrostrukture jekla X11CrNiMo12 modificiranega s Ti in Zr : doktorska disertacija = development of microstructure of steel X11CrNiMo12 modified with Ti and Zr : Ph. D. Thesis /

Shranjeno v:

Bibliografske podrobnosti
Glavni avtor:	Koležnik, Mitja. (Author)
Drugi avtorji:	Medved, Jože. (Thesis advisor)
Format:	Thesis Knjiga
Jezik:	Slovenian
Izdano:	Ljubljana : [M. Koležnik], 2017.
Teme:	jeklo X11CrNiMo12 > modifikacija s Ti in Zr > nekovinski vključki > mehanske lastnosti > razvoj mikostrukture steel X11CrNiMo12 > modification with Ti and Zr > nonmetallic inclusions > development of microstructure
Online dostop:	https://repozitorij.uni-lj.si/IzpisGradiva.php?id=99181&lang=slv
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Resistivity during cycle loading of fine grain heat affected zone (HAZ) of 17CrNiMo7 steel prepared into laboratory furnace /
od: Smaili, Fidan., et al.

Some factors affecting fatigue resistance of welds = Neki faktori koji utiču na otpornost zavara prema zamoru /
od: Gliha, Vladimir., et al.

Microstructure of a Nb-bearing Ni-Cr-Mo dental alloy /
od: Zupanič, Franc., et al.

Študij visokotemperaturne oksidacije nerjavnega jekla EN X12Cr13 z meritvijo električne upornosti : magistrsko delo /
od: Kolar, David.
Izdano: (2012)

Cellular solidification during continuous casting of a Cu-Cr-Zr alloy.
od: Anžel, Ivan., et al.

Influence of tool speed and lubrication on mechanical properties of cold extruded alloy Cr-Cr-Zr /
od: Gusel, Leo, 1968-, et al.

Vpliv parametrov strjevanja na mikrostrukturo zlitine Cu-Cr-Zr : magistrsko delo /
od: Anžel, Ivan
Izdano: (1992)

Vpliv stopnje deformacije na elastično zravnavanje hladno vlečene zlitine CuCrZr = The influence of the strain on springback of cold drawn alloy CuCrZr /
od: Gusel, Leo, 1968-

Vpliv mikrostrukturnih sestavin jeklenih podlag na rast PVD prevlek /
od: Gselman, Peter, 1986-, et al.

Cellular solidification during continuous casting of a Cu-Cr-Zr alloy.
od: Anžel, Ivan., et al.

Numerična analiza strjevanja NiTi zlitine /
od: Zadravec, Matej.

Characerisation of NiTi alloy for biomedical application : invited lecture on IX International Scientific Conference Contemporary Materials 2016 (Savremeni materijali 2016), Banja Luka, September 4 to 5, 2016 /
od: Rudolf, Rebeka., et al.

Microstructure and properties of NiTi and CuAlNi shape memory alloys /
od: Kneissl, Albert C., et al.

Analitično in eksperimentalno določanje mehanskih lastnosti hladno preoblikovanih bakrovih zlitin : magistrsko delo /
od: Gusel, Leo, 1968-
Izdano: (1998)

Razvoj tehnologije izdelave Cr-Ni granulatov : zaključno poročilo o rezultatih opravljenega dela RR faze razvojnega projekta /
od: Anžel, Ivan., et al.
Izdano: (2003)

Microstructure and properties of rapidly solidified NiTi shape memory alloys /
od: Mehrabi, Kambiz., et al.

Mechanical behaviour of material of thermal power plant steam superheater collector after exploitation /
od: Jasnìî, O., et al.

Razvoj tehnologije izdelave Cr-Ni granulatov : fazno letno poročilo za PRR-aktivnosti projekta ... za leto 2002 /
od: Anžel, Ivan., et al.
Izdano: (2002)

Synthesis of NiTi/Ni-TiO[sub]2 composite nanoparticles via ultrasonic spray pyrolysis = Sinteza kompozitnih nanodelcev NiTi/Ni-TiO[sub]2 z ultrazvočno razpršilno pirolizo /
od: Majerič, Peter, 1987-, et al.

Synthesis of NiTi/Ni-TiO2 composite nanoparticles via ultrasonic spray pyrolysis
od: Majerič, Peter, 1987-, et al.

Low-pressure vacuum carburizing of NiTi shape memory alloys /
od: Brunčko, Mihael., et al.

An experimental research of change of properties of cold formed copper alloy /
od: Gusel, Leo, 1968-

Effect of quenching rates on equiatomic NiTi ribbons fabricated by melt-spinning process /
od: Mehrabi, Kambiz., et al.

Izdelava in karakterizacija lastnosti kontinuirno odlite Ni-Ti zlitine /
od: Rudolf, Rebeka., et al.

Weldability of modern 9-12 Cr martensitic steels for steamboiler components = Zavarljivost savremenih 9-12 Cr martenzitnih čelika za komponente u kotlogradnji /
od: Despotović, Božo., et al.

The springback of thin strips of cold drawn alloy CuCrZr /
od: Gusel, Leo, 1968-

Theoretical calculation of stress for the start of stress induced martensitic phase transformation in the Shape Memory Alloys NiTi = Teoretični izračun napetosti za začetek napetostne martenzitne fazne transformacije v zlitinah s spominom oblike NiTi /
od: Ferčec, Janko., et al.

Microstructures and properties of NiTi ribbons in different conditions of melt-spinning process : oral and poster presentation at the European conference Junior Euromat 2008, 14-18 July 2008, Lausanne, Switzerland /
od: Mehrabi, Kambiz., et al.
Izdano: (2008)

Presentation of production technology of NiTi alloys ; Performance of the investigation of the potential cytotoxicity of Ni-Ti alloys : 8 hours of lectures, presented at the Erasmus Teaching Mobility, at the University of East Sarajevo, Medical Faculty, from 10. 8. 2016 till 15. 8. 2016 /
od: Rudolf, Rebeka.

Zlitine na osnovi NiTi z oblikovnim spominom za ortodontsko prakso = NiTi-based shape memory allyos for orthodontic practice /
od: Veselinović, Valentina, materiali., et al.

New approach by determination of NiTi orthodontic arch-wires characteristic properties : lecture, presented at the 18th Congress of the Balkan Stomatological Society (BaSS), Skopje, 25-28 April 2013 /
od: Rudolf, Rebeka., et al.
Izdano: (2013)

Observation of phase transformation in Shape Memory Alloy NiTi wire during in-vitro simulation of orthodontic treatment
od: Rudolf, Rebeka.

Superelastično obnašanje ortodontske žice s spremljanjem napetostno inducirane martezitne transformacije /
od: Rudolf, Rebeka., et al.

Microstructure of melt spun Ni-Ti shape memory ribbons /
od: Rudolf, Rebeka., et al.

Microstructural investigation of melt-spun NiTi-based ribbons /
od: Mehrabi, Kambiz., et al.

Razvoj NiTi žic za uporabo v ortodontske namene : zaključno poročilo o rezultatih bilateralnega projekta : šifra projekta BI-BA/16-17-004 /
od: Rudolf, Rebeka., et al.
Izdano: (2018)

Continuous vertical casting of a NiTi alloy = Vertikalno kontinuirno litje NiTi zlitine /
od: Stambolić, Aleš., et al.

Ni Ti žica : strokovno poročilo za Vojno-medicinsko akademijo v Beogradu /
od: Rudolf, Rebeka., et al.
Izdano: (2010)

Numerical analysis of the rapid solidfication process of NiTi binary alloy /
od: Ternik, Primož., et al.

Novel solution of phase transformation detection in the orthodontic wire : presentation at the ICMAT 2015 & IUMRS-ICA 2015, 8th International Conference on Materilas for Advanced Technologies of the Materials Research Society of Singapore & IUMRS - International Conference in Asia together with 4th Photonics Global Conference 2015, 28 June-3 July 2015, Suntec Singapore /
od: Rudolf, Rebeka.
Izdano: (2015)