Slika na naslovnici

QR koda

Observation of phase transformation in Shape Memory Alloy NiTi wire during in-vitro simulation of orthodontic treatment

Shranjeno v:

Bibliografske podrobnosti
Glavni avtor:	Rudolf, Rebeka. (Author)
Format:	Software Book Chapter
Jezik:	English
Teme:	NiTi-žica > zlitina s spominom oblike > fazna transformacija NiTi wire > shape-memory alloy > phase transformation
Sorodne knjige/članki:	Vsebovano v: Abstract book
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Comparison of NiTi orthodontic archwires and a determination of the charasteristic properties = Primerjava ortodontskih lokastih žic NiTi in določitev značilnih lastnosti /
od: Ferčec, Janko., et al.

Vpliv napetostnega stanja na mikrostrukturo ortodontske spominske zlitine NiTi : doktorska disertacija /
od: Ferčec, Janko.
Izdano: (2014)

Detection of phase transformation in shape memory alloy NiTi wire during in- vitro simulation of orthodontic treatment /
od: Rudolf, Rebeka., et al.

Low-pressure vacuum carburizing of NiTi shape memory alloys /
od: Brunčko, Mihael., et al.

Microstructure and properties of rapidly solidified NiTi shape memory alloys /
od: Mehrabi, Kambiz., et al.

Microstructure and properties of NiTi and CuAlNi shape memory alloys /
od: Kneissl, Albert C., et al.

Methods of investigation of the stress-induced martensite in the orthodontic wire from shape memory alloy NiTi under different stress states /
od: Ferčec, Janko., et al.

Theoretical calculation of stress for the start of stress induced martensitic phase transformation in the Shape Memory Alloys NiTi = Teoretični izračun napetosti za začetek napetostne martenzitne fazne transformacije v zlitinah s spominom oblike NiTi /
od: Ferčec, Janko., et al.

Novel solution of phase transformation detection in the orthodontic wire : presentation at the ICMAT 2015 & IUMRS-ICA 2015, 8th International Conference on Materilas for Advanced Technologies of the Materials Research Society of Singapore & IUMRS - International Conference in Asia together with 4th Photonics Global Conference 2015, 28 June-3 July 2015, Suntec Singapore /
od: Rudolf, Rebeka.
Izdano: (2015)

Numerical analysis of the rapid solidfication process of NiTi binary alloy /
od: Ternik, Primož., et al.

Effect of quenching rates on equiatomic NiTi ribbons fabricated by melt-spinning process /
od: Mehrabi, Kambiz., et al.

Microstructures and properties of NiTi ribbons in different conditions of melt-spinning process : oral and poster presentation at the European conference Junior Euromat 2008, 14-18 July 2008, Lausanne, Switzerland /
od: Mehrabi, Kambiz., et al.
Izdano: (2008)

Observation of phase transformation in shape memory alloy NiTi wire during in-vitro simulation of orthodontic treatment /
od: Rudolf, Rebeka., et al.

Microstructure of melt spun Ni-Ti shape memory ribbons /
od: Rudolf, Rebeka., et al.

Microstructure, mechanical and functional properties of NiTi-based shape memory ribbons /
od: Mehrabi, Kambiz., et al.

Microstructural investigation of melt-spun NiTi-based ribbons /
od: Mehrabi, Kambiz., et al.

Characerisation of NiTi alloy for biomedical application : invited lecture on IX International Scientific Conference Contemporary Materials 2016 (Savremeni materijali 2016), Banja Luka, September 4 to 5, 2016 /
od: Rudolf, Rebeka., et al.

Microstructure of NiTi orthodontic wires observations using transmission electron microscopy /
od: Ferčec, Janko., et al.

Izdelava in karakterizacija lastnosti kontinuirno odlite Ni-Ti zlitine /
od: Rudolf, Rebeka., et al.

Influence of tensile training conditions on shape-memory properties of NiTi-based ribbons /
od: Meharabi, K., et al.

Microstructural investigation of melt-spun NiTi based ribbons = Untersuchung der Mikrostruktur schmelzgesponnener Bänder auf NiTi-Basis /
od: Mehrabi, Kambiz., et al.

Zlitine na osnovi NiTi z oblikovnim spominom za ortodontsko prakso = NiTi-based shape memory allyos for orthodontic practice /
od: Veselinović, Valentina, materiali., et al.

Numerična analiza strjevanja NiTi zlitine /
od: Zadravec, Matej.

Influence of quenching rates on equiatomic NiTi ribbons fabricated by melt-spinning /
od: Mehrabi, Kambiz., et al.

New approach by determination of NiTi orthodontic arch-wires characteristic properties : lecture, presented at the 18th Congress of the Balkan Stomatological Society (BaSS), Skopje, 25-28 April 2013 /
od: Rudolf, Rebeka., et al.
Izdano: (2013)

Stress induced martensite in orthodontic wire form the shape memory alloy nickel titanium under different loading conditions /
od: Ferčec, Janko., et al.
Izdano: (2013)

Pom. akad. dr. Rebeka Rudolf
od: Rudolf, Rebeka.
Izdano: (2014)

Continuous vertical casting of a NiTi alloy = Vertikalno kontinuirno litje NiTi zlitine /
od: Stambolić, Aleš., et al.

Numerical analysis of continuous casting of niti shape memory alloy /
od: Ternik, Primož., et al.

Investigation of bending trainings, transformation temperatures, and stability of two-way shape memory effect in NiTi-based ribbons /
od: Mehrabi, Kambiz., et al.

Metallographic sample preparation of orthodontic Ni-Ti wire /
od: Zorko, Lidija, 1979-, materiali., et al.

Presentation of production technology of NiTi alloys ; Performance of the investigation of the potential cytotoxicity of Ni-Ti alloys : 8 hours of lectures, presented at the Erasmus Teaching Mobility, at the University of East Sarajevo, Medical Faculty, from 10. 8. 2016 till 15. 8. 2016 /
od: Rudolf, Rebeka.

Stress dependent electrical resistivity of orthodontic wire from the shape memory alloy NiTi /
od: Ferčec, Janko., et al.

Microstructural characterisation of orthodontic Ni-Ti wire /
od: Rudolf, Rebeka., et al.

Uporaba NiTi zlitin v tekstilijah : doktorska disertacija /
od: Šalej, Alenka, 1980-
Izdano: (2016)

Force measurements on teeth /
od: Ferčec, Janko., et al.

Razvoj NiTi žic za uporabo v ortodontske namene : zaključno poročilo o rezultatih bilateralnega projekta : šifra projekta BI-BA/16-17-004 /
od: Rudolf, Rebeka., et al.
Izdano: (2018)

Načrt merilne celice za določitev sil in deformacij na modelu zobnega aparata /
od: Rudolf, Rebeka., et al.

Načrt merilne celice za določitev sil in deformacij na modelu zobnega aparata /
od: Ferčec, Janko., et al.

Teoretični izračun napetosti pri natezni, tlačni in strižni obremenitvi za začetek napetostne martenzitne transformacije v zlitinah z oblikovnim spominom NiTi /
od: Rudolf, Rebeka., et al.