Simulation of cutting forces in ball-end milling /
The paper presents a simulation system (SCP) that determines the cutting forces in the ball-end milling process. The system is based on numerical methods, computer programme, theoretical knowledge of technological processes, machining and tests performed. The system for simulation of the cutting pro...
Shranjeno v:
Main Authors: | , |
---|---|
Format: | Book Chapter |
Jezik: | English |
Teme: | |
Sorodne knjige/članki: | Vsebovano v:
Robotics and computer-integrated manufacturing |
Oznake: |
Označite
Brez oznak, prvi označite!
|
LEADER | 01916naa a2200193 ib4500 | ||
---|---|---|---|
001 | 7747094 | ||
003 | SI-MaCOB | ||
005 | 20111128000000.0 | ||
008 | 030218s2003 xxu|||||||||||||| ||eng c | ||
040 | |a KTFMB |b slv |c SI-MaIIZ |e ppiak | ||
080 | |a 621.9 | ||
100 | 1 | |a Milfelner, Matjaž. |4 aut | |
245 | 0 | 0 | |a Simulation of cutting forces in ball-end milling / |c Matjaz Milfelner, Franci Cus. |
300 | |a str. 99-106. | ||
520 | |a The paper presents a simulation system (SCP) that determines the cutting forces in the ball-end milling process. The system is based on numerical methods, computer programme, theoretical knowledge of technological processes, machining and tests performed. The system for simulation of the cutting process combines the technological data base, the analytical and experimental model and the data base SCP. The experimental model contains a collection of variables of the cutting process by means of sensors and transformation of those data into numerical values, which are a starting point for data calculation of characteristic coefficients of materials. The analytical model is used to estimate the tangential, radial and axial cutting forces, along with a material data base obtained from cutting experiments. Ball-end milling test has been conducted to verify simulation results. The simulation results, are the basis for the development of the tool-designing model and for the model of optimization of the machining process cutting parameters. | ||
653 | 0 | |a čelno frezanje |a krogelno oblikovno frezalo |a rezalne sile |a simulacija |a nevronske mreže |a rezalni parametri |a empirični model | |
653 | 0 | |a end milling |a ball-end milling |a cutting forces |a simulation |a neural networks |a cutting parameters |a empirical model | |
700 | 1 | 2 | |a Čuš, Franc, |d 1953- |4 aut |
773 | 0 | |t Robotics and computer-integrated manufacturing |b [Print ed.] |d New York : Pergamon, 1984- |x 0736-5845 |g Vol. 19, iss. 1/2 (2003), str. 99-106 |