Slika na naslovnici

QR koda

Spremljanje in optimiranje procesa frezanja z oblikovnim krogelnim frezalom z uporabo genetskih algoritmov : doktorska disertacija /

V disertaciji je predstavljen sistem za spremljanje in optimiranje procesa frezanja z oblikovnim krogelnim frezalom. Sistem združuje različne metode in tehnologije, kot so: evolucijske metode, tehnologija obdelave, merilna in kontrolna tehnologija, inteligentna procesna tehnologija s podporo ustrezn...

Shranjeno v:

Bibliografske podrobnosti
Glavni avtor:	Milfelner, Matjaž. (Author)
Drugi avtorji:	Čuš, Franc, 1953- (Thesis advisor)
Format:	Thesis Knjiga
Jezik:	Slovenian
Izdano:	Maribor : [M. Milfelner], 2003.
Teme:	optimiranje procesa frezanja > rezalne sile > rezalni parametri > oblikovno krogelno frezalo > genetski algoritmi optimization of milling process > cutting forces > cutting parameters > ball-end mill > genetic algorithms
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Sistem za spremljanje in optimiranje procesa frezanja
od: Milfelner, Matjaž., et al.

Frezanja z oblikovnim krogelnim frezalom /
od: Milfelner, Matjaž.

Genetic equation for the cutting force in ball-end milling
od: Milfelner, Matjaž., et al.

Genetic equation for the cutting force in ball-end milling /
od: Milfelner, Matjaž., et al.

Cutting force model in ball-end milling /
od: Milfelner, Matjaž., et al.

Adaptive network based inference system for simulation of cutting forces in ball-end milling /
od: Župerl, Uroš., et al.

Determination of cutting forces in ball-end milling /
od: Milfelner, Matjaž., et al.

Measuring of cutting forces in milling /
od: Milfelner, Matjaž., et al.

Generation of model of cutting forces by the use of artificial intelligence /
od: Milfelner, Matjaž., et al.

Development of the simulation system for cutting forces in ball-end milling /
od: Milfelner, Matjaž., et al.

A linguistic model based on if-then rules for cutting force predictions in end milling
od: Čuš, Franc, 1953-, et al.

Determination of cutting forces in ball-end milling with neural networks /
od: Čuš, Franc, 1953-, et al.

Cutting force model for 3D ball-end milling /
od: Čuš, Franc, 1953-, et al.

An overview of systems for cutting force measuring /
od: Čuš, Franc, 1953-, et al.

An overview of systems for cutting force measuring /
od: Čuš, Franc, 1953-, et al.

Neural network based model for prediction of cutting forces in milling /
od: Čuš, Franc, 1953-, et al.

Simulation of cutting forces in ball-end milling with neural networks /
od: Milfelner, Matjaž., et al.

Simulation of cutting forces in ball-end milling /
od: Milfelner, Matjaž., et al.

Simulation of cutting forces in ball-end milling /
od: Milfelner, Matjaž., et al.

Data acquisition system for cutting force measuring and optimization in milling /
od: Čuš, Franc, 1953-, et al.

Genetic model for the optimization of the cutting conditions in milling /
od: Milfelner, Matjaž., et al.

System for monitoring and optimization of ball-end milling process
od: Čuš, Franc, 1953-, et al.

An intelligent system for monitoring and optimization of ball-end milling process /
od: Čuš, Franc, 1953-, et al.

Modeling of end milling with multilevel perception /
od: Župerl, Uroš., et al.

Tool cutting force modeling in end milling with improved multilevel perceptron /
od: Čuš, Franc, 1953-, et al.

Tool cutting force modeling in ball end milling using artificial neural networks /
od: Čuš, Franc, 1953-, et al.

Tool cutting force modeling in ball end milling using multilevel perception /
od: Čuš, Franc, 1953-, et al.

Tool cutting force modeling in ball-end milling using multilevel perceptron /
od: Župerl, Uroš., et al.

Simulation of hard end milling by using neural network /
od: Župerl, Uroš., et al.

Cutting force generation in ball-end milling by evolutionary programming /
od: Čuš, Franc, 1953-, et al.

Cutting force measuring in ball-end milling /
od: Milfelner, Matjaž., et al.

Teaching-learning based optimization algorithm for cutting force maximization in end milling processes
od: Župerl, Uroš., et al.

Simulation and optimization of milling with genetic algorithms /
od: Čuš, Franc, 1953-, et al.

Sistem za spremljanje in optimiranje procesa frezanja z uporabo genetskih algoritmov /
od: Milfelner, Matjaž., et al.

Genetic algorithm model for the optimization of the cutting conditions /
od: Milfelner, Matjaž., et al.

An overview of data acquisition system for cutting force measuring in milling /
od: Milfelner, Matjaž., et al.

An overview of data acquisition system for cutting force measuring and optimization in milling /
od: Milfelner, Matjaž., et al.

Dynamic neural network approach for tool cutting force modelling of end milling operations /
od: Čuš, Franc, 1953-, et al.

A system for the simulation of the cutting process in end milling /
od: Milfelner, Matjaž., et al.

Teaching-learning based algorithm combined with cutting force modelling for end milling optimization
od: Župerl, Uroš., et al.