Current and torque waveform analysis of a brushless PM motor
The goal of this research was to determine a current waveform and a torque waveform of the studied electric motor. The current waveform was calculated by electric circuit analysis whereat the unknown parameters were calculated using a finite element model. The procedure for iterative solving of the...
Shranjeno v:
| Main Authors: | , , , |
|---|---|
| Format: | Book Chapter |
| Jezik: | English |
| Teme: | |
| Sorodne knjige/članki: | Vsebovano v:
Proceedings |
| Oznake: |
Označite
Brez oznak, prvi označite!
|
| LEADER | 01632naa a2200217 ib4500 | ||
|---|---|---|---|
| 001 | 9172502 | ||
| 003 | SI-MaCOB | ||
| 005 | 20041122000000.0 | ||
| 008 | 041122s2004 au |||||s|||||||| ||eng c | ||
| 040 | |a KTFMB |b slv |c SI-MaIIZ |d KTFMB |e ppiak | ||
| 080 | |a 621.313/.314 | ||
| 245 | 1 | 0 | |a Current and torque waveform analysis of a brushless PM motor |h [Elektronski vir] / |c Andrej Stermecki ... [et al.]. |
| 300 | |a Str. 418-421. | ||
| 500 | |a Soavtorji še: Igor Tičar, Oszkar Biro, Kurt Preis. | ||
| 520 | |a The goal of this research was to determine a current waveform and a torque waveform of the studied electric motor. The current waveform was calculated by electric circuit analysis whereat the unknown parameters were calculated using a finite element model. The procedure for iterative solving of the FE model and of the circuit model was applied to incorporate the material nonlinearities into this approach. After the current waveform was obtained the torque waveforms were calculated using 2-D and 3-D FE models. This approach was used to analyze different construction varieties and commutation schemes in order to lower the torque ripple at the motor under research. | ||
| 653 | 0 | |a numerical analysis |a torque ripple |a back EMF | |
| 700 | 1 | 2 | |a Stermecki, Andrej. |4 aut |
| 700 | 1 | 2 | |a Tičar, Igor. |4 aut |
| 700 | 1 | 2 | |a Biró, Oszkar. |4 aut |
| 700 | 1 | 2 | |a Preis, Kurt. |4 aut |
| 773 | 0 | |a International IGTE Symposium on Numerical Field Calculation in Electrical Engineering (11 : 2004 : Seggau Castle) |t Proceedings |d Seggau Castle : Department for fundamentals and theory in electrical engineering = IGTE, 2004 |w 9171990 |z 3902465077 |g Str. 418-421 | |