Parametric analysis of heat transfer in closed-cell cellular metals /

The purpose of this paper was to describe the thermal transport properties in closed-cell cellular metals. The influence of cell size with different pore gases has been investigated with transient computational simulations. Heat conduction through the base material and gas in pores (cavities) was co...

Popoln opis

Shranjeno v:
Bibliografske podrobnosti
Main Authors: Vesenjak, Matej. (Author), Žunič, Zoran. (Author), Öchsner, Andreas. (Author), Hriberšek, Matjaž. (Author), Ren, Zoran. (Author)
Format: Book Chapter
Jezik:English
Teme:
Sorodne knjige/članki:Vsebovano v: Proceedings of the 1st International Conference on Diffusion in Solids and Liquids " DSL-2005"
Oznake: Označite
Brez oznak, prvi označite!
LEADER 02355naa a2200241 ib4500
001 9706518
003 SI-MaCOB
005 20050725000000.0
008 050719s2005 po |||||||||||||| ||eng c
040 |a KTFMB  |b slv  |c SI-MaIIZ  |d KTFMB  |e ppiak 
080 |a 536 
245 1 0 |a Parametric analysis of heat transfer in closed-cell cellular metals /   |c Matej Vesenjak ... [et al.].  
300 |a Str. 793-798.  
500 |a Soavtorji: Zoran Žunič, Andreas Öchsner, Matjaž Hriberšek, Zoran Ren.  
520 |a The purpose of this paper was to describe the thermal transport properties in closed-cell cellular metals. The influence of cell size with different pore gases has been investigated with transient computational simulations. Heat conduction through the base material and gas in pores (cavities) was considered, while convection and radiation were neglected in the inital stage of the research. First, parametric analysis for defining the proper mesh density and time steps were carried out. Them 2-D computational models of the cellular structure, consisting of the base material and the pore gas, were solved using the ANSYS CFX software within the framework of finite volume elements. The results have confirmed the expectations that the majority of heat is being tansfered through the metallic base material with an almost negligible heat conduction through the gas in pores. The heat conduction in closed-cell cellular metals is therefore extremely dependent on the relative density, but almost insensitive to the gas inside the pore, unless the relative density is very low. 
653 0 |a prenos toplote  |a celični kovinski materiali  |a porozni materiali  |a plinska polnila  |a zaprte celice  |a numerične simulacije 
653 0 |a heat transfer  |a cellular metallic materials  |a porous materials  |a gas fillers  |a closed-cell  |a computational simulations 
700 1 2 |a Vesenjak, Matej.   |4 aut 
700 1 2 |a Žunič, Zoran.   |4 aut 
700 1 2 |a Öchsner, Andreas.   |4 aut 
700 1 2 |a Hriberšek, Matjaž.   |4 aut 
700 1 2 |a Ren, Zoran.   |4 aut 
773 0 |a International Conference on Diffusion in Solids and Liquids (1 : 2005 : Aveiro, Portugal)  |t Proceedings of the 1st International Conference on Diffusion in Solids and Liquids " DSL-2005"  |d Aveiro : Centre for Mechanical technology and Automation : Department of Mechanical Engineering, 2005  |w 9686294  |z 9737130669  |g Str. 793-798